MicroController based Digital Generator ATS Controller with multi
functionality. It has many features to control the generator
operation. The features are as following:
APPLICATIONS:
Automatic Generator Start/Stop Control
Mobile Towers with UPS Control
FEATURES:
• Manual, Auto and Stop Push Buttons
• Single or Dual Fuel System Automatic Selection
• Safety Inputs i.e. Temperature, Oil Pressure etc.
• UPS and Generator Hybird Control System
• Different Operation Timers with Time Variable Option
• LED Indications for the Status of the Generator
• Smart Design, Easy to Operate and Reliable Performance.
SPECIFICATIONS:
Power Supply: 110VAC or 220VAC (+/- 10%)
Battery Voltage: 12 or 24 VDC
Load Relay: 220VAC 3A
Outputs: Ignition/Crank, Fuel, Choke
Dimensions: 96mm x 96mm x 110mm
OPERATING MODES:
Stop Mode: Nothing will happen if Mains Power Supply fails.
Test Mode: In this mode it will start the Generator normally but
will not shift the load on the Generator. This mode can be
activated even Mains Power Supply is ON.
Auto Mode: This is automatic mode in which the generator will be
start automatically when the Mains Power Supply fails. Then the
Controller will shift the load on the Generator. Then if Mains Power
Supply available then the load will be shifted on Mains Power
Supply and after Cool Down Time the Generator will be Switched
Off. If during Cool Down Time, Mains Power Supply fails then simply
the load will be shifted on the Generator.
Generator ATS Controller
DIGITAL GENERATOR ATS CONTROLLER
